E350 ,E355
1.service mode * 1 7 + 3 9 * FACTORY mode
2.select 01 [ ALL RAM CLEAR ]
3.select E35* CLEAR & ALL RAM CLEAR [-]
4.select KeyPad NUM 2
5.select OK
6.Wait for the system to reset the system. And up to E355 and turn off the machine
7.Assemble COUNTER,SERIAL
8.Turn the device into the normal screen.
note
If E-CODE 246 is removed, remove the COUNTER and SERIAL panels.
Send new upgrades
No comments:
Post a Comment