Error Code E000-0000 E000-0010

Error Code E000-0000 E000-0010
Detail Error Code
 iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N

E000  The heater fails to heat.  After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)

0000 After power-on, the reading of the main thermistor does not increase to 70
deg C or higher within 20 sec.

- Replace the main/shutter thermistor.
- Replace the DC controller PCB.


0010  The power has been turned off and then on without resetting the error.

- Reset the error. (COPIER>FUNCTION>CLEAR>ERR

ERROR CODE:
E000 (low temperature detection error)
0000 after power-on, the reading of the main thermistor is not 70 deg C or higher within 20 sec .
0010 the power has been turned off and then on without resetting the error in question.

If E000 through E004 is indicated, the error code will not be reset even when you turn off the main power switch, requiring you to use service mode (COPIER >
FUNCTION > CLEAR > ERR).