ir5075_series
E602 error in hard disk or HDD encryption board
0001 [Cause] HD detection error: the HD cannot be detected; the machine fails
to turn ready; an error state is returned.
[Description] at time of Bootrom processing, BARSAC is started up and
mounted (usrIde).
[Timing] once at power-on
0002 [Cause] start-up file absent: the main CPU program does not exist on the
HD (/BOOTDEV/BOOT/and lower).
[Description] at time of Bootrom processing, when the system files are
being loaded (usrIde).
[Timing] once at start-up
0003 [Cause] HD write abort error: /BOOTDEV sector on the HD cannot be
read.
[Description] BARSAC (all areas at Bootable start-up)
[Timing] once at start-up
0006 [Cause] SubBootable compatible with the PDL type does not exist in /
BOOTDEV/BOOT.
[Description] when SubBoot in oclibroot is being loaded
[Timing] once at start-up of Bootable
0007 [Cause] ICC-Profile compatible with the PDL type does not exist in /
BOOTDEV/PDL.
[Description] beginning of oclibroot; the PDL team function is called and
determined
[Timing] once at start-up of Bootable
2000 error in the authentication between the host machine and the encryption
board
- Check the encryption board connection, plug off/in the connector and turn
off/on the power switch.
- Perform the key-clear.
2001 error in alignment of the encryption board operation - Perform the key-clear.
2002 the encryption board failure, etc. - Check the encryption board connection, plug off/in the connector and turn
off/on the power switch.
- Perform the key-clear.
- Replace the encryption board and reinstall the HDD format and SYSTEM
of SST
- Replace LAN-BARSAC board -> replace the main board
01XX /FSTDEV is faulty.
02XX /IMG_MNG is faulty.
03XX /FSTCDEV is faulty.
04XX /APL_GEN is faulty.
05XX /TMP_GEN is faulty.
06XX /TMP_FAX is faulty.
07XX /TMP_PSS is faulty.
08XX /PDLDEV is faulty.
09XX /BOOTDEV is faulty.
10XX /APL_MEAP is faulty.
11XX /APL_SEND is faulty.
12XX /APL_KEEP is faulty.
13XX /APL_LOG is faulty.
FFXX There is an error in a partition that cannot be identified.
No comments:
Post a Comment